Bukit Panjang · HDB resale
Say goodbye to warping, termites, and water damage. Upgrade to aluminium kitchen cabinet.
HausAluminium · laser-welded aluminium cabinets
HausAluminium cabinets are made in Singapore with a laser-welded aluminium carcass, a 1.0 mm aluminium skin and a powder-coated finish. Leaks, splashes and termites have nothing to soak into or eat.
Built for wet kitchens. Blum hinges and drawers as standard.
From S$4,600typical 4-room BTO kitchen · 4 combinations to choose from
500+ homes since 2012Locally fabricatedZero VO Guarantee
Eight reasons it suits Singapore kitchens
Leaks and wet-kitchen splashes don't soak into aluminium the way they soak into board.
No wood in the carcass, so termites have nothing to eat under the sink or behind the wall.
Each panel is one laser-welded aluminium profile with internal ribs. There's no bonding layer to fail.
Against 0.7 mm on the honeycomb panel we measured. See the caliper at our showroom.
Each shelf is rated for 30 kg: pots, rice cooker and pantry stock.
Choose welded aluminium doors for a formaldehyde-free cabinet. WPC doors are rated separately.
Blum hinges and drawers, plus larders, pull-down wall baskets and corner units from Kesseböhmer, Higold, Nuomi, Peka and Oppein.
The aluminium carcass doesn't swell or rot, so the kitchen doesn't need replacing every few years.
Swipe for more →
Clear starting prices
You don't have to go fully aluminium. A typical 4-room BTO kitchen with base and wall cabinets costs about S$4,600 to S$10,600, depending on how much of it is aluminium and the length of your kitchen.
Option 1
Typical 4-room BTO kitchen, base + wall
Aluminium carcass and welded aluminium doors throughout.
Option 2Most chosen
Typical 4-room BTO kitchen, base + wall
Aluminium carcass throughout, with WPC laminate doors.
Option 3
Typical 4-room BTO kitchen, base + wall
Aluminium base cabinets with WPC doors, wood wall cabinets.
Option 4
Typical 4-room BTO kitchen, base + wall
A wood kitchen with the sink cabinet in aluminium.
Prices are for a typical 4-room BTO kitchen. A tall unit, if there is space for one, is quoted separately. Your quotation is itemised from your own measurements and fixed under the Zero VO Guarantee.
Replacing an old kitchen? Aluminium can't be fitted over existing wooden cabinets. We remove the old kitchen and install new cabinets in its place.
Send us the other quote and we'll price the same layout line by line.
Before you choose
Aluminium is the right call for most wet kitchens, but not for every home. Here is how to tell.
Want a warm wood look? Choose aluminium base cabinets with wood wall cabinets (Option 3), or see our kitchen carpentry.
See kitchen carpentryThe best way to decide: open a door and tap the panel at our Eunos showroom.
One material, every wet area
Aluminium goes anywhere water, humidity or weather would damage wooden cabinets. These are recent HausBedroom installations.




Also built for service yards. Where a cabinet gets direct rain or sun, we build it in full aluminium with welded doors.
Make it yours
Every HausAluminium carcass is laser-welded aluminium. You choose the door, and the door decides the colour range.
No glue in the panel, formaldehyde-free. The only option for cabinets in direct rain or sun.
Matches most laminates on the market, at a lower cost. For indoor and sheltered areas.
Welded aluminium doors · powder coat

WPC doors · laminate
Most laminates on the market, so your kitchen can match the rest of your home.
Bring your laminate code, or choose from the samples at our showroom.
See every door and colour side by side at our Eunos showroom
Inside every cabinet
Every cabinet runs on Blum hinges and drawers. Pull-out baskets, larders and corner units come from specialist storage brands, so a small HDB kitchen holds more and you bend less.
Blum hinges and drawers are included. Pull-out storage is quoted separately and named item by item on your quotation.










How it's built
Made in Singapore from laser-welded aluminium panels with a powder-coated finish.
Cut panel with a caliper reading 1.0 mm. See it at our Eunos showroom.
Why laser-welded, not honeycomb? A welded panel is one aluminium profile with no bonding layer inside, so it holds screws, hinges and shelf loads best. Honeycomb panels bond two skins to a core; they suit very large flat doors and wood-grain finishes. We use laser-welded panels for every carcass.
Swipe the table →
| Property | Aluminium (HausAluminium) | Plywood / laminate | Stainless steel |
|---|---|---|---|
| Humidity & leaks | Won't swell, warp or rot | Can swell if the edge seal fails | Won't swell or rot |
| Termites | Termite-proof | Vulnerable | Termite-proof |
| Formaldehyde | None in the carcass and welded doors | Depends on board grade (E1, E0 or ENF) | None |
| Look | Powder coat; WPC doors match most laminates | Widest range, warm wood look | Industrial, shows fingerprints |
| Door sound | Slightly metallic, softened by Blum soft-close | Solid | Metallic |
| Upfront cost | Mid to premium | Budget to mid | Premium |
Full breakdown in our guide: Aluminium vs stainless steel vs plywood
Every kitchen is made to measure. These are the standard module sizes we start from when planning an HDB or condo kitchen.
Swipe the table →
| Unit | Widths (mm) | Height (mm) | Depth (mm) | Typical use |
|---|---|---|---|---|
| Base cabinet | 300, 450, 600, 750, 900 | 720 + 100 plinth | 560 | Sink, hob, drawers, pull-out baskets |
| Corner base | 900 | 720 + 100 plinth | 560 | L-shaped kitchens, corner pull-outs |
| Wall cabinet | 300, 450, 600, 750, 900 | 700 | 320 | Plates, dry goods, pull-down baskets |
| Tall cabinet | 450, 600 | up to 2,400 | 560 | Larder, oven and microwave housing |
Pipes, DB boxes and gas points are measured on site before the quotation.
Real projects, real homes
Kitchens, an outdoor shoe cabinet and a balcony storage cabinet in Singapore homes, with the combination each owner chose.
Bukit Panjang · HDB resale
Option 1 · Full aluminium, welded panels
Geylang · Condo
Option 2 · Aluminium carcass + WPC doors
Sengkang · HDB resale
Option 3 · Aluminium base + WPC doors, wooden wall cabinets, aluminium-framed fluted glass doors
Serangoon · Landed home
Full aluminium · built for outdoor weather
Orchard · Condo
Aluminium carcass + WPC doors, laminate finish
How it works
One accountable team from measurement to after-sales. Fabrication takes 4–5 weeks after you approve the drawings.
Old kitchen removal is scheduled at site measurement and quoted separately.
See it, tap it, then decide
9 Kaki Bukit Road 1, #02-10, Eunos Technolink, Singapore 415938
Mon–Sat 9:30am–6:30pm, by appointment · Sunday closed
FAQ
Can't find your answer? Ask us on WhatsApp.
HausAluminium cabinets are made in Singapore by HausBedroom with a laser-welded aluminium carcass, a 1.0 mm aluminium skin and a powder-coated finish. They are built for wet kitchens, bathrooms, service yards and outdoor areas, where wooden cabinets swell, rot or attract termites.
A typical 4-room BTO kitchen with base and wall cabinets costs about S$4,600 to S$10,600 with us. A wood kitchen with an aluminium sink cabinet starts from about S$4,600, an aluminium carcass with WPC doors is about S$6,400 to S$8,300, and full aluminium is about S$8,300 to S$10,600. The price includes Blum hinges and drawers, a hob, a dish drying rack, delivery and installation. Countertop, sink, pull-out baskets, LED lighting and tall cabinets are quoted separately.
Yes. Aluminium doesn’t absorb moisture, so the carcass won’t swell, rot or grow mould in Singapore’s humidity, and it is termite-proof.
No. Aluminium can’t be fitted over existing wooden cabinets. We remove the old kitchen and install new aluminium cabinets in its place. Removal is quoted separately.
No. You can choose full aluminium, an aluminium carcass with WPC doors, aluminium base cabinets with wood wall cabinets, or a wood kitchen with only the sink cabinet in aluminium. The sink cabinet option costs S$400 more per sink cabinet than an all-wood kitchen.
A laser-welded panel is one aluminium profile with internal ribs and no bonding layer. A honeycomb panel bonds two aluminium skins to a honeycomb core. Welded panels hold screws, hinges and shelf loads better; honeycomb suits very large flat doors and wood-grain finishes. We use laser-welded panels for every carcass.
The carcass and welded aluminium doors are. WPC laminate doors are not formaldehyde-free. We show you both at the showroom so you can choose.
Welded aluminium doors sound more metallic than board doors. Blum soft-close hinges slow every door to a gentle close. Try one at our showroom before you decide.
Each HausAluminium shelf is rated for 30 kg, enough for pots, appliances and pantry stock.
Every cabinet has Blum soft-close hinges and Blum drawers. Pull-out baskets, larder units, pull-down wall baskets and corner units come from Kesseböhmer, Higold, Nuomi, Peka and Oppein. Each item is named on your quotation.
Yes. We build bathroom vanities, service yard and balcony cabinets, and outdoor shoe cabinets. Where a cabinet gets direct rain or sun, we build it in full aluminium with welded doors.
Fabrication takes 4–5 weeks after you approve the drawings. Removal of the old kitchen and installation are scheduled at site measurement.
At our showroom at 9 Kaki Bukit Road 1, #02-10, Eunos Technolink, Singapore 415938. It is open Monday to Saturday, 9:30am to 6:30pm, by appointment.
HausBedroom
Typically replies within 1-2 hours
Planning your bedroom? We'd love to help.
Whether it's a BTO, resale, or new home —
chat with us and get expert advice in 1-2 hours.
Chat with us on WhatsApp →
🔒 No obligations. Free consultation
WhatsApp us