A 2 m × 2 m L-shaped wardrobe in Singapore starts from S$4,200 with sliding doors (HausFlex), and goes up to about S$8,700 for premium ENF cabinetry with casement doors. Open versions without doors start from S$2,500. On every level, the corner stays fully usable, with no dead box you can't reach.
An L-shape gives you the most storage for the wall space, but only if the corner works. In many built-in wardrobes, it doesn't. These are the three problems we see most when replacing old wardrobes.
The corner becomes a closed cabinet you can only reach at full stretch. Things go in, and you stop using them.
Doors on the two walls hit each other at the corner, or only open part of the way, so you never see the whole inside.
A window on one wall, or aircon trunking in the corner, forces filler boards and box-ups that waste space and block access.
Every level we offer is built to avoid these three. Here's how.
The method depends on the level. Pole and metal systems use an open corner shelf and doors that open from both ends. Built-in and HausSignature use one L-shaped carcass with wide-angle hinges.
HausPole · HausFlex
A corner shelf joins the two runs, with the pole or metal frame running to one end. There's no closed box and no post in the way, so you can reach right into the corner.
Sliding or bi-fold doors open from either end of each run, so you get full access inside without the doors clashing at the corner.
One sliding door can slide into the corner and stay there, freeing a wider opening at the other end of the run.
Custom built-in · HausSignature
The wardrobe is built as one L-shaped carcass. Its doors swing open to 170°, almost flat, so they clear the corner and you can see and reach the whole inside.
The carcass turns the corner as one piece, built to your walls, so there are no filler boards or gaps where the two runs meet.
Slide to compare. Every level keeps the corner usable, and every price below is for a typical 2 m × 2 m L-shape.
Level 1 · Simplest
A full-metal, wall-anchored modular wardrobe. The lowest-cost way to build an L-shape with doors.
Level 2
Aluminium poles fixed from wall to floor, so it works on partition walls too. Shelves adjust to the millimetre.
Level 3
Carpentry built to your walls as one L-shaped carcass, for a fully finished look.
Level 4 · Premium
Premium cabinetry made by Oppolia, with ENF boards and PUR edge banding. For condo and landed homes that want the highest finish.
Prices are "from", for a typical 2 m × 2 m L-shaped wardrobe at standard ceiling height (under 2.6 m). Bi-fold or mixed sliding-and-bi-fold doors cost more and are quoted on request.
Check two things: how much floor the wardrobe takes, and how much space the doors need in front of it. Sliding doors need the least.
Every L-shape is drawn to your walls. Send us the length of each wall and where the bed goes, and we'll check the fit.
The door type decides how easily you reach the corner, and how much space you need in front.
SlidingHausFlex · HausPole · in the prices above
No swing space needed. Doors open from both ends, and one can park in the corner to free the other end.
Bi-foldHausFlex · HausPole · quoted on request
Opens wider than sliding, so you see a whole bay at once. Costs more than sliding.
Sliding and bi-fold mixedHausFlex · HausPole · quoted on request
Sliding on one run, bi-fold on the other, chosen by how much space each wall has in front.
Casement on 170° hingesCustom built-in · HausSignature · in the prices above
Doors swing almost flat, so they clear the corner. Needs more space in front than sliding.
Glass doors are available on every level, in frosted, tinted, fluted or mirror finishes.
See door optionsMost L-shaped wardrobes have to work around something: a window, trunking or a ledge. These are the ones we plan for most often.
HDB · Condo
The poles or metal frame go around the trunking instead of boxing it in, so it stays reachable for servicing.
Usually chosen: HausPole or HausFlex
Condo
The wardrobe is built over the bay ledge, so the space becomes storage instead of a dust shelf.
Usually chosen: any level, planned to the ledge
Condo · Some HDB
The wardrobe runs across the window, with a modular section that opens or comes off so the technician can still service the compressor.
Usually chosen: HausPole or HausFlex
All homes
One run becomes a dressing or study counter, with full-height storage on the other.
Usually chosen: HausPole (with a dresser), custom built-in or HausSignature
HDB · Condo
The storeroom becomes a small walk-in, with the L-shape on two walls and the floor left clear.
All homes
This one was damaged by a leaking aircon trunking, on a wall that wasn't straight. We removed it and fitted the new wardrobe to the slanted wall. Disposal, power point shifting and repainting are quoted separately if you need them.
Usually chosen: any level
Got an awkward corner?Send us a photo and the length of each wall. We'll tell you which level fits.
Send us your cornerFor a typical 2 m × 2 m L-shaped wardrobe with doors, prices start from S$4,200 with HausFlex and go up to S$8,700 with HausSignature. With doors, HausFlex comes in about 26% below custom built-in, and HausPole about 13% below.
| Level | With doors | Open, no doors | Door type | Fabrication |
|---|---|---|---|---|
| HausFlex | from S$4,200 | from S$2,500 | Sliding | 2–4 weeks |
| HausPole | from S$4,978 | from S$3,537 | Sliding | 2–4 weeks |
| Custom built-in | from S$5,700 | from S$4,978 | Casement, 170° hinges | 3–5 weeks |
| HausSignature (ENF) | from S$8,700 | from S$7,800 | Casement, 170° hinges | 7–12 weeks |
Want to know why extras like drawers, open shelves and lighting cost more? Read our full wardrobe cost guide.
Got a quote from another brand or your ID?Send it over and we'll compare it line by line.
Send us your quoteFor a typical 2 m × 2 m L-shaped wardrobe with doors, prices start from S$4,200 with HausFlex, S$4,978 with HausPole, S$5,700 for custom built-in and S$8,700 for HausSignature ENF cabinetry. Without doors, they start from S$2,500, S$3,537, S$4,978 and S$7,800. These are "from" prices at standard ceiling height under 2.6 m. Bi-fold doors cost more than sliding and are quoted on request.
HausFlex is a full-metal, wall-anchored modular system and the lowest-cost option. HausPole uses aluminium poles fixed wall to floor and works around aircon trunking. Both use an open corner shelf and sliding doors, with 2 to 4 weeks fabrication. Custom built-in is carpentry built as one L-shaped carcass with casement doors on 170° hinges, with 3 to 5 weeks fabrication. HausSignature uses the same L-shaped carcass with premium ENF boards and PUR edge banding, with 7 to 12 weeks fabrication.
Not with the way we build it. HausPole and HausFlex use an open corner shelf, with the pole or metal frame running to one end, so there is no closed box to reach into. Custom built-in and HausSignature use one L-shaped carcass with casement doors on 170° wide-angle hinges, so the doors swing almost flat and clear the corner.
Yes. With a bay window, we build the wardrobe over the bay ledge so the space becomes storage. Where a window leads to the aircon compressor, the wardrobe runs across it with a modular section that opens or comes off, so the technician can still service the compressor.
Sliding doors need no swing space, open from both ends of each run, and one door can park in the corner to free the other end. They are included in our HausFlex and HausPole prices. Bi-fold doors open wider, so you see a whole bay at once, but cost more and are quoted on request. You can also mix sliding on one run and bi-fold on the other.
Yes. HausPole and HausFlex go around the trunking instead of boxing it in, so it stays reachable for servicing. Built-in carpentry usually has to box the trunking in.
The wardrobe itself is about 600 mm deep. With sliding doors, you need about 600 mm of walking space in front. With casement doors, allow about 900 mm for the door swing and room to stand. Send us the length of each wall and where the bed goes, and we will check the fit.
Fabrication takes 2 to 4 weeks for HausFlex and HausPole, 3 to 5 weeks for custom built-in, and 7 to 12 weeks for HausSignature, counted from when you approve the drawing. Installation is scheduled once fabrication is done.
We'll reply with a suggested L-shape layout and a price range for each level, so you can compare before you visit.
Showroom at Eunos Technolink, 9 Kaki Bukit Road 1, #02-10. Mon to Sat, 9:30am to 6:30pm, by appointment.
