Wardrobe Under a Beam: How to Build Without Boxing It Up

Why beams cause problems for wardrobes
Most Singapore bedrooms have at least one ceiling beam, and it often sits right along the wall where the wardrobe should go. It is even more common in resale flats where two bedrooms have been merged: the wall is hacked, but the structural beam has to stay.
Fixed carpentry wardrobes are boxes. To fit under a beam, the usual approach is to box it up: bring the whole wardrobe forward to the line of the beam and fill the gap with panels. That causes three problems:
- Lost depth everywhere. The whole carcass moves forward, not just the part under the beam. On one Potong Pasir wall with a beam and trunking, a box-up would have lost up to 100mm across the entire wardrobe.
- Sealed-off services. Aircon trunking often runs beside the beam. Box it in, and a future leak can mean tearing the wardrobe out to reach the pipe.
- Dead voids. The boxed-in space above and behind the beam can't be used for anything.
Box-up carpentry vs a pole system
| Box-up carpentry | HausPole / HausFlex system | |
|---|---|---|
| Depth | ✗Whole wardrobe brought forward to the beam line, losing up to 100mm | ✓Poles follow the wall; full depth kept where there's no obstacle |
| The beam | ✗Hidden behind added panels | ✓Left as is; shelving runs underneath it |
| Aircon trunking | ✗Usually boxed in and hard to service | ✓Stays reachable, or tucked below a shelf |
| Front appearance | ✗Flush, but bulkier | ✓Flush, with poles set at different depths behind the doors |
| Hacking | ✗Sometimes needed to make the box fit | ✓Not needed; installed in front of the wall |
| Changing the layout later | ✗Fixed once built | ✓Shelves, drawers and rails can be moved anytime |
How we design a wardrobe around a beam
1. Set the poles at different depths
Instead of lining everything up with the deepest obstacle, each pole sits at the depth that suits its position. In our Potong Pasir project, a beam and aircon trunking shared one wall; the poles were set at different depths, the trunking was hidden below the shelves, and the front stayed flush.
2. Run the shelving under the beam, not up to it
A beam doesn't have to split the wardrobe into sections. In a Hougang resale flat with two merged bedrooms, 3.7 metres of continuous shelving runs under the beam: his side on the left, hers on the right.
3. Wrap the corner when the beam sits where the L turns
Corner beams are the hardest case for an L-shaped wardrobe. In this Bedok HDB, the poles and shelving wrap the corner without panelling over the beam, and the trunking on one side stays reachable.
4. Combine systems where it makes sense
In a Bendemeer BTO walk-in, an open HausPole sits below the ceiling beam on one side, in front of a structural wall with no hacking, while HausFlex with black tinted sliding doors runs along the other.
5. Choose doors that close over everything
Doors are what make the finished wall look clean. Mirror bifolds, as in this Yishun HDB with a beam and uneven walls, open up the room visually. Top-hung doors avoid a bottom track entirely. Tinted glass sliding doors make the whole run read as one feature wall.
HausPole or HausFlex under a beam?
Both can go under a beam, and we have used both. HausPole is the usual choice when the beam, trunking or wall are at different depths, because each pole is positioned individually. HausFlex, our modular steel system, works well behind doors on a straighter run, and the two can be combined in the same room.
Beam projects we've completed

Bendemeer BTO
A whole bedroom turned walk-in. HausPole sits under the ceiling beam, HausFlex behind tinted doors. No hacking.
See project →
Potong Pasir
Beam and aircon trunking on one wall. Poles set at different depths keep the front flush without losing 100mm.
See project →
Yishun HDB
A beam plus uneven walls. A full-wall HausPole with mirror bifold doors, and nothing boxed up.
See project →
Hougang resale
Two bedrooms merged, one beam left behind. 3.7m of continuous shelving runs under it, his and hers.
See project →
Bedok HDB
A beam right at the corner of the L, with trunking along one side. HausPole wraps around both; trunking stays reachable.
See project →What does it cost?
Price depends mainly on the wardrobe length, the internal fittings (drawers, trouser hangers, lighting) and the door type. Because nothing is boxed up, you aren't paying for extra panels just to hide the beam. The quickest way to get a figure is to send us a photo of the wall with the beam and its rough width.
Frequently asked questions
Can I put a wardrobe under a beam in an HDB flat?
Yes. A pole system such as HausPole is fixed between the floor and the underside of the beam, so the wardrobe runs continuously below it. We have done this in BTO, resale HDB and condo bedrooms, including flats where two rooms were merged and the beam was left behind.
Do I have to box up the beam?
No. Boxing up is what fixed carpentry needs, because the cabinet carcass has to line up with the deepest point. A pole system follows the wall instead, so the beam stays as it is and you keep the depth.
How much space does a box-up waste?
Usually more than people expect. When a beam or aircon trunking is boxed in, the whole wardrobe is brought forward to that line, which can lose up to 100mm of depth across the entire wardrobe, not just under the beam.
What happens to aircon trunking next to the beam?
It stays accessible. We position poles and shelves around the trunking, or hide it below a shelf, so it can still be reached for servicing. With boxed-up carpentry, a leaking aircon pipe can mean tearing the wardrobe out to reach it.
Will the wardrobe look uneven from the outside?
No. Poles can be set at different depths behind the doors, so the front stays straight and flush. Sliding, bifold or top-hung doors then close over the whole run.
Is hacking needed?
No. The system is installed in front of the wall and under the beam. In our Bendemeer BTO project it was installed in front of a structural wall without any hacking.
Can I change the layout later?
Yes. Shelves, drawers and hanging rails can be moved along the poles as your storage needs change, without new carpentry.
Got a beam where your wardrobe should go?
WhatsApp us a photo of the wall and its rough width. We'll show you how a system can work around it, without boxing it up.
WhatsApp +65 6842 1514Or visit our showroom at Eunos Technolink, #02-10.