HausSignature · Manufactured by Oppolia
ENF Wardrobes in Singapore, Factory-Made by Oppolia
HausSignature wardrobes are made in Oppolia's own factories and installed by HausBedroom in Singapore. You get what a local workshop can't easily give you: ENF-grade boards, PUR-sealed edges, CNC-cut and pre-drilled panels, and factory finishes such as lacquer, wood veneer and powder coat.
From S$3,050 open, or S$3,300 with casement doors, for the first 1.5 m.
- ENF boards
- PUR edge banding
- Blum hardware
- 5-year product warranty
ENF
Board grade, the strictest formaldehyde grade
PUR
Edge banding that holds in Singapore heat
CNC
Cut and pre-drilled in the factory
Blum
Soft-close hinges and drawers
5 years
Product warranty, plus 2 years on installation
7–12 weeks
Made to order, from drawing sign-off
Factory-made vs workshop-made
What Oppolia's Factory Gives Your Wardrobe That a Local Workshop Can't
We build both: custom built-in wardrobes in a local workshop, and HausSignature wardrobes made in Oppolia's own factories. These are the differences you can see and touch.
-
Board
1 / 8
ENF-grade boards
HausSignature particle boards are ENF, the strictest formaldehyde grade under China's GB/T 39600-2021 standard: 0.025 mg/m³ or less.
ENF is the strictest grade, not zero formaldehyde. The board grade is printed on every line of your quotation.
-
Edges
2 / 8
PUR edge banding
All four edges are sealed with PUR glue, machine-applied on HOMAG edge banders. PUR cures into a bond that doesn't soften again in heat, so edges stay sealed in Singapore's humidity.
Local carpentry, including our own built-in range, uses EVA glue.
-
Precision
3 / 8
Cut and pre-drilled by CNC
Every panel is cut, and every connector hole drilled, by CNC machines in the factory. On installation day we assemble, with no sawing and no sawdust in your home.
See a factory panel next to a workshop-cut one at our showroom.
-
Finish
4 / 8
7-coat lacquer
Three primers, three top coats and a polishing coat, baked on MDF in the factory. The colour runs seamlessly over the door, in matte or gloss.
Our local built-in range doesn't offer lacquer doors.
-
Finish
5 / 8
Veneer, powder coat and thermofoil
Real wood veneer, six-sided powder coat, and soft-touch PET or shaped PVC thermofoil. Each is applied on a factory line.
Our local built-in range is HPL laminate or melamine.
-
Choice
6 / 8
125+ colours, 100+ door styles
Handleless push-to-open, profiled, integrated handle and aluminium-frame glass doors, in more than 125 colours (Oppolia's range).
Handles or handleless doors are included in the price.
-
Structure
7 / 8
H-shaped frame
The hanging rail and side panels screw into one H-shaped frame, joined with concealed connectors. The load spreads evenly, so tall wardrobes stay square, with no fixings on show.
Tall doors also get an adjustable straightener so they don't bow.
-
Warranty
8 / 8
5-year product warranty
Five years on the wardrobe itself, plus two years on our installation workmanship. One HausBedroom team measures, installs and services it.
Our local built-in wardrobes carry a 2-year warranty.
We make both
HausSignature vs Local Carpentry Wardrobes in Singapore
A straight comparison between our two built-in ranges. Local built-in wins on price, speed and changes on site. HausSignature wins on board grade, edges, finishes and warranty.
Shaded = the stronger option on that row
| Feature | HausSignatureMade in Oppolia's factory | Custom built-inMade in a local workshop |
|---|---|---|
| Who makes it | Oppolia, in its own factories | A local carpentry workshop |
| Board | ENF particle board, MDF or plywood (stronger option) | Local plywood or compressed board. The grade is printed on every quotation line |
| Edge banding | PUR, machine-applied on HOMAG edge banders (stronger option) | EVA |
| Cutting and drilling | CNC-cut and pre-drilled in the factory (stronger option) | Cut in the workshop, adjusted on site |
| Door finishes | PVC and PET thermofoil, powder coat, lacquer, wood veneer (stronger option) | HPL laminate or melamine |
| Hardware | Blum | Blum |
| Lead time | 7–12 weeks from drawing sign-off | 3–5 weeks (stronger option) |
| Changes on site | Limited: parts are made to the signed drawing | Easy to adjust on site (stronger option) |
| Warranty | 5-year product, plus 2 years on installation (stronger option) | 2 years |
| From (first 1.5 m) | S$3,050 open S$3,300 with casement doors |
S$1,800 open S$2,150 with casement doors (stronger option) |
Not sure which suits your room? Send us your floor plan and we'll tell you honestly, even if it's the cheaper option. See all four wardrobe levels
Help me choosePrice
How Much Does a HausSignature Wardrobe Cost?
A HausSignature wardrobe starts from S$3,050 for the first 1.5 m with open shelving, or S$3,300 with casement doors. A 2 m × 2 m L-shaped wardrobe starts from S$7,800 open, or S$8,700 with doors. Here's what that price covers.
Straight wardrobe · first 1.5 m
HausSignature built-in wardrobe
- OpenS$3,050
- With casement doorsS$3,300
What's included
- ENF board carcass with PUR-sealed edges
- Blum hinges, drawers, hanging rods and shelves
- Handles or handleless doors
- Site measurement, final re-measure and 3D design
- Delivery and installation
- 5-year product warranty, plus 2 years on installation
Priced separately: lighting, glass doors, mirrors and additional accessories.
L-shape · 2 m × 2 m
HausSignature L-shaped wardrobe
- OpenS$7,800
- With doorsS$8,700
How the corner is built
- One L-shaped carcass, so the corner isn't wasted
- 170° wide-angle hinges, so casement doors open fully beside the corner
- Everything in the straight wardrobe card is included
Priced separately: lighting, glass doors, mirrors and additional accessories.
See L-shaped wardrobes at every price level- Price changes with:
- Length and ceiling height
- Door finish: thermofoil → powder coat → lacquer → veneer
- Door style
- Lighting, glass, mirrors and accessories
How does this compare with a custom built-in wardrobe?
| From | HausSignature | Custom built-in |
|---|---|---|
| First 1.5 m, open | S$3,050 | S$1,800 |
| First 1.5 m, casement doors | S$3,300 | S$2,150 |
| 2 m × 2 m L-shape, open | S$7,800 | S$4,978 |
| 2 m × 2 m L-shape, with doors | S$8,700 | S$5,700 |
The difference pays for ENF boards, PUR edges, factory CNC panels, finishes like lacquer and veneer, and a 5-year warranty instead of 2. If those don't matter for your room, custom built-in is the better buy.
Send your floor plan on WhatsApp and we'll reply with a price range.
Fit check
Is a HausSignature Wardrobe Right for You?
HausSignature isn't the right wardrobe for every home. Here's when it's worth the extra, and when one of our other ranges suits you better.
Choose HausSignature if…
- You want the strictest board gradeENF boards, for example in a child's room or a nursery.
- You want a factory-applied finishBaked lacquer, wood veneer, powder coat or soft-touch PET, none of which our local built-in range offers.
- You want handleless or glass-frame doorsPush-to-open doors or aluminium-frame glass, with even gaps from factory-cut panels.
- You want it to lastPUR-sealed edges and a 5-year product warranty.
Know this first
- It takes 7–12 weeksCounted from drawing sign-off. Moving in sooner? Our custom built-in wardrobes take 3–5 weeks.
- Late changes are harderParts are made to the signed drawing, which is why we re-measure your room before anything goes to the factory.
- It costs moreOn a tighter budget, a HausPole pole system starts from S$1,350, and a HausFlex metal wardrobe from S$950.
- Trunking or beams on the wall?HausPole fits around aircon trunking without boxing it in, and keeps it serviceable.
Wardrobe types
HausSignature Wardrobes We Install in Singapore
Every HausSignature wardrobe is made to your room's measurements, in HDB flats, condos and landed homes.
-
Built-in wardrobe
Floor to ceiling, with casement or sliding doors, and drawers, hanging rods and shelves planned around what you own.
Master and common bedrooms
-
Walk-in wardrobe
Open shelving and hanging, or glass-fronted cabinets, around two or three walls of the room.
Converted study, condo master walk-in, landed dressing room
Walk-in wardrobes at every price level -
L-shaped and corner
One L-shaped carcass, with 170° wide-angle hinges so casement doors open fully beside the corner.
Bedrooms where one wall isn't long enough
L-shaped wardrobes at every price level -
Glass doors and lighting
Aluminium-frame glass doors with lighting inside, to show off bags, shoes or a collection.
Glass doors, mirrors and lighting are priced separately
Configure
Wardrobe Door Finishes You Won't Get From Local Carpentry
Our local built-in doors are HPL laminate or melamine. HausSignature doors are finished on factory lines, which adds four finishes our workshop doesn't offer. You choose in three steps.
Choose a finish
-
Cost $$$$
PVC and PET thermofoil
- What it is
- Film pressed onto MDF. PET is smooth and soft to the touch; PVC wraps shaped doors.
- Good at
- Soft-touch flat doors and profiled doors, with no edge line.
- Watch out
- Keep away from direct heat. PET suits flat doors only.
-
Cost $$$$
Powder coat
- What it is
- A seamless coating on all six sides of an MDF door.
- Good at
- Hard-wearing and easy to wipe clean.
- Watch out
- Solid colours and fine textures only, no wood grain.
-
Cost $$$$
Lacquer (spray paint)
- What it is
- Seven coats baked on MDF: three primers, three top coats and a polishing coat.
- Good at
- Seamless colour, matte or gloss, in any shade.
- Watch out
- A chip needs touching up. Sits at the 12-week end of the lead time.
-
Cost $$$$
Wood veneer
- What it is
- A real timber slice on MDF or plywood.
- Good at
- Natural grain that no film can copy.
- Watch out
- Colour shifts in sunlight. Sits at the 12-week end of the lead time.
Listed from lowest to highest cost. You can mix finishes in one wardrobe.
Choose a door style
HandlelessPush-to-open, for a clean front.
Integrated handleA finger pull built into the door.
ProfiledShaped panels for a classic look.
Aluminium-frame glassClear, tinted or fluted. Priced separately.
Handles or handleless doors are included in the price. Oppolia's range covers more than 100 door styles.
Choose a colour
Pick from more than 125 colours (Oppolia's range). Screens don't show finishes accurately, so we confirm every colour on a physical sample at our showroom before anything is ordered.
See the samples in personHardware and construction
What's Inside a HausSignature Wardrobe
The parts you don't see decide how a wardrobe feels after five years. These details come from Oppolia's craftsmanship wall in our showroom. The test figures are Oppolia's.
-
Blum
Soft-close hinges and drawers
Blum hinges and concealed drawer runners as standard. Drawers close softly and carry up to 25 kg.
-
550 N+
Concealed connectors
Panels lock together with hidden connectors rated to a tensile strength of 550 N or more. No fixings on show.
-
Straight doors
Door straightener
An adjustable profile on the back of tall doors keeps them from bowing over time.
-
Airflow
Slide-in back panel and vents
A moisture- and mould-resistant back panel slides in and out, and vents keep air moving so the cabinet stays dry in humid weather.
-
Quiet slide
Screw-free sliding track
For sliding doors: a rubber strip keeps out dust and noise, and anti-derailment rollers keep doors on the track.
-
−5 to +20 mm
Adjustable feet
Four height settings level the wardrobe on an uneven floor, without hacking the floor or packing it with shims.
Open the doors and pull the drawers yourself. The full craftsmanship wall is at our Eunos showroom.
Book a showroom visitSpecifications
HausSignature Wardrobe Specifications
| Manufacturer | Oppolia, in its own factories |
|---|---|
| Board cores | Particle board 16 or 18 mm; MDF 18, 21 or 25 mm; 9- or 11-layer plywood |
| Board grade | ENF particle board: GB/T 39600-2021, 0.025 mg/m³ or less. What ENF, E0 and E1 mean |
| Edge banding | PUR glue, applied on HOMAG edge banders; PVC, aluminium or wood veneer edge strips |
| Panels | CNC-cut and pre-drilled in the factory |
| Door finishes | PVC and PET thermofoil, powder coat, lacquer (7 coats), wood veneer |
| Door styles | Handleless push-to-open, integrated handle, profiled, aluminium-frame glass |
| Colours | 125+ (Oppolia's range); decor paper from Schattdecor (Germany) or Lamigraf (Spain) |
| Hardware | Blum as standard; Hettich, Kesseböhmer, Higold, DTC, Peka or Nuomi by choice |
| Lead time | 7–12 weeks from drawing sign-off, depending on finish |
| Warranty | 5-year product warranty; 2 years on installation workmanship |
| Measure, install, service | HausBedroom, Singapore |
How it works
How We Make and Install Your HausSignature Wardrobe
Seven steps from your floor plan to a finished wardrobe. Because the parts are made to the drawing, we measure twice before anything goes to the factory.
-
Send your floor plan
WhatsApp us your floor plan or room photos. We reply with a price range.
-
Visit the showroom
Touch the finishes and try the hinges and drawers at Eunos. Pick a finish and door style.
-
Site measurement
We measure your room, including beams, ceiling height and power points.
-
3D design and quotation
You see the wardrobe in 3D. The board grade is printed on every line of the quotation.
-
Before the factory
Final re-measure and sign-off
We re-measure on site, then you sign off the drawings. Only then does anything go to the factory.
-
Made by Oppolia
Panels are cut, edged, drilled and finished in the factory: 7–12 weeks, depending on finish.
-
Installation and handover
We assemble on site, with no sawing. Your 5-year product warranty starts here.
Send your floor plan on WhatsApp.
Showroom
See and Touch HausSignature at Our Eunos Showroom
The difference between factory-made and workshop-made is easier to feel than to read about. At our showroom you can:
- Hold a factory pre-drilled panel next to a workshop-cut one
- Compare the finish samples side by side: thermofoil, powder coat, lacquer and veneer
- Open the Blum hinges and pull the soft-close drawers
- See the craftsmanship wall: connectors, door straightener, vents and levelling feet
- Compare HausSignature with our custom built-in, HausPole and HausFlex in one visit
Mon–Sat, 9:30am–6:30pm · Book ahead so a designer is free for you
FAQ
HausSignature Wardrobe Questions
Can't find your answer? Ask us on WhatsApp.
Ask a question What ENF, E0 and E1 meanWhat is HausSignature?
HausSignature is HausBedroom's premium wardrobe range, manufactured by Oppolia in its own factories and measured, designed, installed and serviced by HausBedroom in Singapore. The boards are ENF grade, the edges are sealed with PUR glue, and every wardrobe carries a 5-year product warranty.
Is Oppolia a Chinese brand?
Yes. Oppolia makes HausSignature wardrobes in its own factories in China, where most of the woodworking machinery comes from Germany and Italy (Oppolia's figures). HausBedroom has been an Oppolia dealer since 2025 and handles everything in Singapore, from measuring to after-sales.
How is HausSignature different from local carpentry?
HausSignature panels are made in a factory, not a workshop. You get ENF boards, PUR edge banding instead of EVA glue, CNC-cut and pre-drilled panels, factory finishes such as lacquer, wood veneer and powder coat, and a 5-year warranty. Local custom built-in costs less, takes 3–5 weeks instead of 7–12, and is easier to adjust on site. We make both and will tell you which suits your room.
Is ENF formaldehyde-free?
No. ENF is the strictest formaldehyde grade under China's GB/T 39600-2021 standard, at 0.025 mg/m³ or less, but it is not zero. The board grade is printed on every line of our quotation.
How long does a HausSignature wardrobe take?
7 to 12 weeks from the day you sign off the drawings, depending on the finish. Lacquer and wood veneer take the longest. Before anything is ordered, we re-measure your room so the factory-made parts fit.
How much does a HausSignature wardrobe cost?
From S$3,050 for the first 1.5 m with open shelving, or S$3,300 with casement doors. A 2 m × 2 m L-shaped wardrobe starts from S$7,800 open, or S$8,700 with doors. The price includes Blum hinges, drawers, hanging rods, shelves, and handles or handleless doors. Lighting, glass doors, mirrors and additional accessories are priced separately.
What warranty do I get?
A 5-year warranty on the wardrobe itself, plus 2 years on our installation workmanship. For comparison, our local custom built-in wardrobes carry a 2-year warranty.
Can I make changes after ordering?
Changes are hard once production starts, because every panel is cut and drilled to the signed drawing. That's why we re-measure your room and confirm finishes on physical samples before anything goes to the factory. If you expect to change things on site, custom built-in is the better choice.
Can I see HausSignature before deciding?
Yes. Our showroom at 9 Kaki Bukit Road 1, #02-10, Eunos Technolink has the finish samples and Oppolia's craftsmanship wall. It's open Monday to Saturday, 9:30am to 6:30pm. Book a visit on WhatsApp first so a designer is free for you.